Product DEtails

TACHOGRAPH PROGRAMMER (TACHO)
TACHOGRAPH PROGRAMMER (TACHO)TACHOGRAPH PROGRAMMER (TACHO)TACHOGRAPH PROGRAMMER (TACHO)TACHOGRAPH PROGRAMMER (TACHO)TACHOGRAPH PROGRAMMER (TACHO)TACHOGRAPH PROGRAMMER (TACHO)TACHOGRAPH PROGRAMMER (TACHO)c2c1a27ab6ebfbf6cb0a60056eefc332TACHOGRAPH PROGRAMMER (TACHO)TACHOGRAPH PROGRAMMER (TACHO)

TACHOGRAPH PROGRAMMER CD400

Tachographs

$1,225.00

Weight: 2 kg

Tachograph programmer (TACHO)

Tachograph programmer (Tacho) CD400 is designed for verification, calibration and configuration of control devices (tachograph) when installed on vehicles. The device allows you to define the W figure determination on measuring track or rolling road, K figure measure, can be used as speed simulator for the tachograph when checking the speedometer and odometer.

Category: .

Product Description

The Tachograph programmer CD400 calibrates and programs all analogue and digital tachographs.

Supported Tachographs:

Analogs: KTCO 1314/1318, Motometer EGK100, FTCO 1319, MTCO 1324/1390, TSU 1391, VR2400.
Digitals: DTCO 1381 (DTCO® 2.1 active), SE5000 (Exakt Duo), SmarTach, EFAS-4.
*A Workshop Card is required to calibrate the digital tachographs

Functions

– W figure determination on measuring track (with optional photo-cell) or rolling road.
– K figure measure on KTCO 1314, KTCO 1318 and FTCO1319.
– Parameter programming.
– Activation and deactivation of IMS (Independent Motion Signal).
– Activation and deactivation of VDO counter.
– Odometer reset and adjustment (mileage correction).
– Speed simulation and customizable automatic test diagram.
– DTCS reading (Digital) and erasing.
– Sensor pairing (KITAS activation).
– Clock test.
– Workshop card’s PIN recording and input through CD400.

Technical Specifications:

– Graphic FSTF LCD Display:
(100 x 32 pix. / 4 lines x 20 char)
White LED backlight
– Size: 150 x 100 x 45 mm
– Supply voltage: 9 to 30 VDC
– Supply current: 12mA
– Case: green-blue ABS (IP40).
– Operating temp: -20…+70°C
– Weight: 155g

Advantages

– No power connection nor battery charging required, the only tester powered by the tachograph itself.
– Compact size, the smallest tachograph tester on the market.
– User friendly, clear 4 lines menus, no training required.
– Automatic tachograph model detection on power on.
– Double accuracy of the W factor measure on track by detecting half pulses.
– The only tester being able to reset the odometer and change the sender type on the VR2400.
– Flash program memory, easy software upgrade using a serial port or USB serial adapter on any PC.

Multi-language menu

English – Deutsch – Español – Français – Nederlands – Português – Turkish – Romanian- Serbian – Russian

Kit included:

CD400 – tacho programmer
Cable for 1319
Cable for 13ХХ/1318, V.Root 8400
Cable for EGK-100
Cable for 1324
Cable for V.Root 2400
Cable for CA-RS232-1
Cable for digital tacho
Manual

Additional Information

Weight2 kg